AUTOMATIC DEMOLDING MACHINE FOR COMPOSED LEGOSTAMPO
The automatic de-molding machine receives the molds from a conveyor and then, self-adjusting, centers the mold both longitudinally and transversely, holding it on the belt. A gripper rests on the mold, inserting the opening devices that move the lid away from the holding arms, while from below a pair of pneumatic actuators compress the springs and then lift the lid with another gripping device.
Two swinging arms raise the mold to tip it over the product receiving belt, which descends either by gravity or by the action of compressed air insufflated through provided holes. In the meantime, the lid is placed on the conveyor and sent to the mold washer, and then the overturned mold is deposited and sent to the mold washer, with a new mold being introduced at the same time.
Mold and lid will then be placed side by side to optimize the operation of the mold washer.
An operator panel allows management of the Legostampo demolding machine and it is possible to connect remotely for service.
SEMI-AUTOMATIC DEMOLDING MACHINE FOR COMPOSED LEGOSTAMPO
For small productions and for research and development, we propose a demolding facilitator, with roller conveyor and adjustable guides for the introduction and containment of the mold. By pressing a button, the mold is simultaneously lifted until the opening devices intervene and the springs are then compressed. The operator can manually extract the lid and then, with pneumatic control, lower the mold, which will be pulled out and flipped over to obtain product extraction.
Simple adjustments make it possible to turn the demolding machine into a semi-automatic press.